Felt-lined rubber boots BIZON PRO SBP E CI HRO

BIZON PRO felt-lined rubber boots are designed for outdoor and indoor work in conditions with water, moisture and cold. The footwear is 100% waterproof. It is personal protective equipment protecting against CATEGORY II hazards, meeting the requirements of Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 and the harmonised standard: EN ISO 20345:2022 "Personal protective equipment. Safety footwear". It is produced by hand assembly (HANDMADE) and vulcanisation in autoclaves. It is made of a black RUBBER compound forming the rubber upper up to 2/3 of the height of the whole boot, and a graphite felt upper forming the inner lining and insulation. At the back of the boot, on a rubber strap, there is a reflective element improving the user's visibility and safety. In addition, up to ankle height the footwear has an extra layer of rubber protecting the foot against minor mechanical injuries. The design and materials used guarantee high comfort of use. The sole has a special anti-slip and self-cleaning tread that makes everyday use easier. Available in sizes 39 to 47 in French sizing. NOTE! The boots should not be used in environments with concentrated acids, alkalis, organic solvents, oils and greases. This may drastically shorten the life of the product and reduce the protective properties of the footwear.HAZARDS AND EFFECTIVENESS The footwear protects the user against the following hazards: toes against impact with energy up to 200 J and crushing with a force up to 15 kN the foot against puncture with a force up to 1100 N slipping (basic requirements according to standard 20347:2022) static pressure, E – energy absorption in the heel area penetration of low temperatures CI – insulation of the soles against cold contact with a hot surface at a temperature of 300 degrees C for 1 minute HRO water and moisture OPAKOWANIE I PRZECHOWYWANIE unit packaging (1 pair) – plastic bag with a unit label. bulk packaging (5 pairs in one size) – cardboard box with a bulk label. Each pair of boots comes with instructions for use. Felt-lined rubber footwear should be stored, where possible, in its transport packaging, dry, clean, at a temperature of (20±5) oC. The footwear should not be bent, compressed, placed near a heat source or exposed to sunlight/strong artificial light, ozone and other substances harmful to rubber, i.e. organic solvents, oils, fuels, lubricants, acids and alkalis. Boots that are properly stored and maintained age much more slowly. Failure to follow the storage recommendations may cause cracks on the surface and make the boots leak.