Reusable capsule filter OXYLINE OXYPRO X793 P3 R

OXYLINE OXYPRO X793 P3 R/ OXYLINE capsule filter meets the standards EN 143:2000 + A1:2006 (Respiratory protective devices - filters). Reusable filter. Personal protective equipment of category III. When combined with a suitable twin-filter half mask or full face mask, the X793 P3 R capsule filter protects the respiratory system against non-toxic and moderately toxic solid aerosols or water-based aerosols (dust, smoke, mist), provided the concentration of the aerosol's dispersed phase does not exceed 50 x NDS (Maximum Permissible Concentration) when combined with a half mask and 1000 x NDS when combined with a full face mask. The X793 P3 R filter has a bayonet connector allowing connection to X6 and X7 series half masks and X8 series full face masks. OZNAKOWANIA/ IDENTYFIKACJA ZAGROŻENIA TYPE P3: colour white/ solid particles, dust/ high-capacity gas filters, intended for protection against gases or vapours at a volume concentration in air of up to 1% (10.000 ppm) R - reusable filter INSTRUKCJA MONTAŻU Read the instructions for use carefully and make sure the filtering elements have been correctly selected for the hazards Make sure the product is not damaged, contaminated, deformed or dirty, and that it is in its original packaging If the product is contaminated, deformed or past its expiry date, it must be replaced Align the plastic connector of the filtering elements correctly with the socket in the half mask or mask Press in and turn the filter clockwise Repeat the procedure when fitting the second filter OGRANICZENIA I PRZECHOWYWANIE Do not use in environments where the oxygen concentration is below 19.5% or in the presence of unknown gases Store in the original packaging together with the instructions, without filtering elements attached, at a temperature from -20°C to +30°C and humidity RH<80% Protect from direct sunlight Adapt to the working environment, contaminant concentration and type of work