Combined filter OXYPRO X70926 A1-B1-E1-K1-P3

X70926 ABEK1P3 R D COMBINED FILTER meets the standards EN 14387 (respiratory protective devices - gas filters and combined filters - requirements, testing, marking). The X70926 ABEK1 P3 R D combined filter is a reusable product for twin-filter half masks. The X70926 ABEK1P3 R D combined filter with bayonet connector protects against organic vapours and gases with a boiling point above 65°C (colour brown), inorganic vapours and gases except carbon monoxide (colour grey), sulphur dioxide and acid vapours and gases (colour yellow), ammonia and ammonia derivatives (colour green) at a volume concentration in air not exceeding 0.1%, and against dusts, fumes and mists. MATERIAŁY Housing: Polypropylene Outer carton dimensions: 620/245/275 mm Net weight per piece: 131 g Gross carton weight: 7.86 kg Number of filters per outer carton: 30 pairs OZNAKOWANIA/ IDENTYFIKACJA ZAGROŻENIA TYPE A1: brown/ organic gases and vapours with a boiling point above 65°C, e.g. solvents, hydrocarbons, etc./ low sorption capacity gas filters, designed to protect against gases or vapours at a volume concentration in air not exceeding 0.1% (1.000 ppm) TYPE B1: grey/ inorganic gases and vapours, e.g. chloride, cyanide, formaldehyde, hydrochloric acid/ low sorption capacity gas filters, designed to protect against gases or vapours at a volume concentration in air not exceeding 0.1% (1.000 ppm) TYPE E1: colour yellow/ acid gases and vapours, e.g. sulphur dioxide etc./ low-capacity gas filters, intended for protection against gases or vapours at a volume concentration in air not exceeding 0.1% (1.000 ppm) TYPE K1: colour green/ ammonia and organic ammonia derivatives/ low-capacity gas filters, intended for protection against gases or vapours at a volume concentration in air not exceeding 0.1% (1.000 ppm) TYPE P3: colour white/ solid particles, dust/ high-capacity gas filters, intended for protection against gases or vapours at a volume concentration in air of up to 1% (10.000 ppm) R: the combined filter can be used for longer than one work shift D: the filter has passed the optional dolomite dust clogging test INSTRUKCJA MONTAŻU Read the instructions for use carefully and make sure the filtering elements have been correctly selected for the hazards Make sure the product is not damaged, contaminated, deformed or dirty, and that it is in its original packaging If the product is contaminated, deformed or past its expiry date, it must be replaced Align the plastic connector of the filtering elements correctly with the socket in the half mask or mask Press in and turn clockwise Repeat the procedure when fitting the second filter OGRANICZENIA/ PRZECHOWYWANIE Do not use in environments where the oxygen concentration is below 19.5% or in the presence of unknown gases Storage: in the original packaging together with the instructions, without filtering elements attached, at a temperature from -20°C to +30°C and humidity RH<80% Protect from direct sunlight Adapt to the working environment, contaminant concentration and type of work Shelf life: gas filters that are properly stored and in their original packaging have a shelf life of 5 years from the date of manufacture. The date of manufacture is shown on the gas filter and on the packaging.