Dust filter FS-ZI38 P3 R

OPIS PRODUKTU Dust filter FS-ZI38 P3 R/ FILTER SERWIS meets the standard EN 143 (Respiratory protective devices - filters), protection class P3. Effective filtration of at least 99%. The very light filter ensures wearing comfort. The filter is made of needle-punched polyester nonwoven, melt-blown polypropylene nonwoven and cover nonwoven. Attachment by means of a bayonet connector; they can also be combined with 3M 6000 and 7500 series gas filters using the 3M-502 adapter. The filter protects against solid particle aerosols or water-based aerosols (dust, smoke) and aerosols with a liquid dispersed phase (mists), provided the concentration of the dispersed phase of the aerosol does not exceed 50 x OEL. Thanks to the sorption layer containing activated carbon, it is intended to protect the respiratory system against organic vapours below the OEL. As the filters are intended for repeated use, after each use remove the filters from the half mask, shake off the dust and then put them in a plastic bag. Inhaling contaminated air causes negative, often irreversible effects on human health. We recommend dust filters, which are used in many industries: removal of hazardous substances, mining, construction, pharmaceutical industry. KONSTRUKCJA FILTRA Needle-punched polyester nonwoven Melt-blown polypropylene nonwoven Activated carbon nonwoven Cover fibres Bayonet connection OZNAKOWANIE FILTRA P3- used for protection against solid and liquid particles of high toxicity for which OEL<0.05mg/m3, provided the maximum concentration is up to 20xOEL - filtration efficiency 99% R- filter intended for repeated use Storage temperature from -20°C to +40°C, air humidity in the storage room below 90% Primary packaging: 20 pieces in a box