Dust filter FS-ZI28 P2 R

OPIS PRODUKTU Dust filter FS-ZI28 P2 R/ FILTER SERVICE meets the standard EN 143 (Respiratory protective devices - filters), protection class P2. Effective filtration of at least 94%. The very light filter ensures wearing comfort. The filter is made of needle-punched polyester nonwoven, melt-blown polypropylene nonwoven, activated carbon nonwoven and cover nonwoven. Attachment by means of a bayonet connector; they can also be combined with 3M 6000 series gas filters using the 3M-502 adapter. Compatible with 3M 6000 and 7500 series half masks. The filter protects against solid particle aerosols or water-based aerosols (dust, smoke) and aerosols with a liquid dispersed phase (mists), provided the concentration of the dispersed phase of the aerosol does not exceed 12 x OEL. As the filters are intended for repeated use, after each use remove the filters from the half mask, shake off the dust and then put them in a plastic bag. Inhaling contaminated air causes negative, often irreversible effects on human health. We recommend dust filters, which are used in many industries: removal of hazardous substances, mining, construction, pharmaceutical industry. Filters with a layer of activated carbon nonwoven can also be used in environments with unpleasant odours. KONSTRUKCJA FILTRA Needle-punched polyester nonwoven Melt-blown polypropylene nonwoven Activated carbon nonwoven Cover fibres Bayonet connection OZNAKOWANIE FILTRA P2- filtration efficiency 94% - used for protection against solid and liquid particles of low and medium toxicity for which OEL?0.05mg/m3 R- filter intended for repeated use FS - manufacturer identifier Storage temperature from -20°C to +40°C, air humidity in the storage room below 90% Primary packaging: 20 pieces in a box