Gas filter 3301-T-A2B2E2K2 PA for Panarea 7040/D

OPIS PRODUKTU Gas filter A2B2E2K2 for Panarea 7040/D/ FILTER SERVICE meets EN 148-1 (respiratory protective devices - threads for facepieces - Part 1: standard thread connection). Very light gas filter with a profile that does not obstruct the field of vision. The combined filter is compatible with the PANAREA 7000 full face mask fitted with an Rd 40 x 1/7 threaded connector. The filter is used in many industries: general industry, the glass industry, industrial cleaning, the metallurgical and steel industry, maintenance, the medical and pharmaceutical industry, the paper, shipbuilding and textile industries, the wood industry, welding. Before use, make sure that the level of protection provided by the respirator is appropriate for the type and concentration of contaminants in the work area, observe the shelf life stated on the filter and check the sealing points. Properly selected filters protect the worker against damage to health. Gas filter (TYPE ABEK) protects against the following types of gases: TYPE A2- organic gases and vapours, e.g. solvents with a boiling point above +65°C at a volume concentration in air ?0.1% (1,000 ppm) TYPE B2- inorganic gases and vapours, e.g. chlorine and hydrogen sulphide TYPE E2- acid gases and vapours at a volume concentration in air ?0.1% (1,000 ppm), e.g. sulphur dioxide TYPE K2- ammonia and organic ammonia derivatives at a volume concentration in air ?0.1% (1,000 ppm) CLASS 2- gas filters with medium sorption capacity, intended for protection against gases or vapours at a volume concentration in air not exceeding 0.5% (5,000 ppm) The gas filter must not be used in an atmosphere where the oxygen content falls below 17%. Primary packaging: 1 piece in a box